The Harmony Defender 360 is a budget friendly addition to the world of combination seats — car seats that convert from a forward facing five point harness into a belt positioning booster. It’s a nice option for tight spaces, let’s take a closer look.
CSFTL Quick Stats
- WIP MADISON Carhartt Carhartt MADISON WIP LOGO WIP Carhartt MADISON Cap LOGO WIP Cap Cap Carhartt LOGO MADISON LOGO Forward facing weight limit: 22 – 65 pounds
- Forward facing height limit: 27-57 inches tall
- Lower anchor weight limit: 46 pounds
- Highest harness position: 18.5 inches (18 inches with EPS foam in. Foam can be removed at 40lbs child weight – this is a retroactive change)
- High back or backless booster weight limit: 30-110 pounds
- High back or backless booster height limit: 34-57 inches tall
- 20 inch top high back booster shoulder belt guide
- 10 year expiration
- Tether is required in harness mode
- 2015 IIHS Best Bet
- Seat pan depth: 16 inches
- Width at widest point: 18.5 inches
- Weight: 19 pounds
LOGO Carhartt WIP Cap LOGO Carhartt MADISON LOGO MADISON WIP Cap Cap Carhartt WIP MADISON MADISON WIP LOGO Carhartt Assembly
In the interest of packaging efficiency, the Defender does not come assembled. The assembly requires some effort and attention to detail – the whole process took me about 45 minutes while taking photographs, so it’s probably a 20-30 minute ordeal and requires two Phillips screwdrivers.
Always, always, always read your manual! While these photos walk through the assembly process, it’s important to refer to the instruction manual for full, detailed instructions.
MADISON Carhartt Carhartt WIP LOGO LOGO Cap Cap LOGO MADISON WIP Carhartt WIP LOGO WIP Carhartt Cap MADISON MADISON The first step is to remove the connectors from the armrests where they’re stored.
Next, remove this bar from the backrest. This requires a Phillips screwdriver for this. Unsnap the seat’s cover in order to slide the bar out.
Step three: move the backrest to the upright position, then re-insert the screws into the armrests. Align the grooves on the inner pieces.
Finally, adjust the seat into the fully reclined position using the knob on the front of the car seat. Then re-insert the bar and screw it in place. This final move requires two Phillips screwdrivers simultaneously – one for each side.
Once the seat is assembled, it’s time to adjust the Defender to fit the child.
It took me a minute to find the adjuster for the harness height. Reach under the cover at the head and feel around for this red handle. Pull up on it and the harness easily slides up and down, and it can be moved while the seat is installed. There are 9 options, from 11″ to 18.5″. For children who ride forward facing, always position the harness at or just above the child’s shoulders.
There are two available positions for the crotch buckle, they measure 6″ and 8″ deep. To switch between the two, simply slide the webbing sideways, then through the slot forward to the next position. This can also be done while the seat is installed. One downfall of the Defender is that the crotch strap length is fairly short, and can be uncomfortable for some children’s legs. Harmony does have a longer option available to customers upon request.
Fit to Child
3 Years Old
This model is 3 years old. She weighs 35 pounds and is 41 inches tall. She found the Defender quite comfortable and she’s got plenty of room to grow in the seat.
Cap MADISON WIP Carhartt Carhartt MADISON LOGO WIP WIP Carhartt LOGO MADISON Cap WIP MADISON Cap LOGO LOGO Carhartt 4 Years Old
My model is 4.75 years old, weighs 40 pounds and is 42 inches tall. He fit comfortably in the harness, with lots of height room to grow. The crotch buckle was snug and did poke into his thighs a bit, but the buckle didn’t seem to bother him, nor was it difficult to buckle.
Harness Mode Installation with Lower Anchors
Installation was a breeze. The seat has clip style lower anchor connectors that were easy to use, and seat belt installation did not pose any problems. Harmony recommends use of the top tether at all times. Harmony has updated its instruction manual to permit up to 2 inches of overhang over the edge of the vehicle seat. Always use the top tether.
High Back Booster Mode
The booster function provided a great seat belt fit this young model. Summer Summer jacket COVIS khujo COVIS khujo adFFq. The belt fit perfectly, with the lap belt low on his hips, touching the tops of his thighs, and the shoulder belt even across the torso. The lap belt was a bit difficult to thread under the armrests, but otherwise it was very easy to use.
In the past, Harmony allowed the use of latch in booster mode on a case-by-case basis. We would encourage anyone to call Harmony to investigate this option for their particular Defender.
The Defender also becomes a backless booster once the child has outgrown the high back potion of the seat.
- Easy to install
- WIP LOGO MADISON Carhartt WIP MADISON LOGO MADISON MADISON Carhartt WIP LOGO Carhartt LOGO Cap WIP Cap Carhartt Cap Narrow enough for 3 car seats across
- Requires assembly
- Short crotch strap that can be uncomfortable (longer strap is available at no charge from Harmony)
- WIP Carhartt LOGO WIP Cap Cap LOGO MADISON WIP LOGO MADISON MADISON Cap Carhartt LOGO MADISON WIP Carhartt Carhartt WIP LOGO MADISON WIP WIP Cap Cap LOGO WIP Cap Carhartt MADISON Carhartt Carhartt LOGO MADISON Carhartt LOGO MADISON Cannot use LATCH in booster mode
Important Information: Where to Find
Manual storage: the manual stores on the bottom of the seat. This is a fine location when assembling the seat but makes checking anything while the seat is installed a challenge since the Defender has to be uninstalled to access the manual.
FAA Approval label: the Defender is approved for use on aircraft in harness mode. The indicator label is found on the bottom of the seat.
Like all booster seats, the Defender requires a lap and shoulder belt so it’s not approved for aircraft use in booster mode.
Date of Manufacture: this label is on the bottom of the seat.
Summer jacket PERSUIT Barbour Barbour International™ Barbour jacket Summer International™ PERSUIT Zqpp7w5
Overall, I was pretty impressed with the Defender. The biggest two struggles are the complicated assembly process and the short crotch buckle length may be uncomfortable for some children. There was a lot that I did love about the Defender: the harness height and tightness adjustments are very smooth and easy to use, and installation did not pose any challenges. The slim profile is great for families with multiple kids, and the ten year expiration makes it a seat that would get the average preschooler all the way up to age 10-12 when they are ready to ride without a booster. And the affordable price tag makes it pretty friendly on the wallet, too.
Harmony did not provide a seat or sponsor this review, opinions are all our own!
Originally written by Emma Douglas. Edits maintained by CSFTL.